GSM SIM 800l  [RESOLVIDO]

Projetos de arduino
Marza
Novato
Mensagens: 2
Registrado em: 20/Dez/2018, 23:48

GSM SIM 800l

Mensagem por Marza » 20/Dez/2018, 23:59

boa noite!
Estou tendo problemas com o SIM 800l, ele pisca 7 vezes (1 segundo) e depois fica sem piscar por aproximadamente 4 segundos. Só aceita comando AT quando esta piscando.
Por gentileza, alguém poderia dar alguma orientação?

Marza
Novato
Mensagens: 2
Registrado em: 20/Dez/2018, 23:48

Re: GSM SIM 800l  [RESOLVIDO]

Mensagem por Marza » 21/Dez/2018, 16:55

Boa tarde! Depois de uma semana "batendo cabeça", identifiquei o problema: o jumper (positivo e negativo) tinha 20cm de comprimento, cortei e fiz dois de 10cm. Funcionou!!

joao
Experiente
Mensagens: 37
Registrado em: 19/Jul/2018, 11:48

Re: GSM SIM 800l

Mensagem por joao » 23/Dez/2018, 03:08

Legal!!! Marca o tópico como resolvido!

8-)

GabrielMajaron
Experiente
Mensagens: 41
Registrado em: 05/Jun/2018, 15:52

Re: GSM SIM 800l

Mensagem por GabrielMajaron » 27/Dez/2018, 11:10

O que poderia ser também é a alimentação do módulo, que tem que ser de 3.6 a 4.2V
Caso ele seja alimentado com 5V ele pode desligar/reiniciar por segurança

Geraldrob
Membro
Mensagens: 3
Registrado em: 10/Mar/2019, 03:14

GSM SIM 800l

Mensagem por Geraldrob » 10/Mar/2019, 20:30

Hi,

I am having PIN locked GSM Sim, So is there any way to unlock it programatically ?

Thanks In Advance...

Imagem

bennieIncok
Membro
Mensagens: 7
Registrado em: 20/Abr/2019, 20:12

GSM SIM 800l

Mensagem por bennieIncok » 24/Abr/2019, 12:09

Zdravim.
Znamy koupil branu s otviranim pres GSM a resi nejakou sim kartu.
Jeden znamy mu pry tvrdil, ze u nekterych operatoru se da ziskat druha sim na jeden tarif.
Co je na tom pravda?

Barrysazib
Membro
Mensagens: 7
Registrado em: 02/Jul/2019, 17:34

GSM SIM 800l

Mensagem por Barrysazib » 13/Jul/2019, 15:18

Hi I have tried to get my GSM SIM900 shield up and working but I have some problems.
I have followed the instructions and used the code to “Creating a test setup for the GPRS Shield” together with my Arduino Uno and the Arduino IDE.
The shield seems to work according to the leds, but the shield only displays the text “ÿÿÿÿÿÿÿÿ” when powering up the shield manually.
The communication seems to work because I have twice got the message “NORMAL POWER DOWN” when turning off the shield, but most of the time I only get a “ÿ” .

Do you have any idea of what’s wrong?

Responder