Página 1 de 1

GSM SIM 800l

Enviado: 20/Dez/2018, 23:59
por Marza
boa noite!
Estou tendo problemas com o SIM 800l, ele pisca 7 vezes (1 segundo) e depois fica sem piscar por aproximadamente 4 segundos. Só aceita comando AT quando esta piscando.
Por gentileza, alguém poderia dar alguma orientação?

Re: GSM SIM 800l  [RESOLVIDO]

Enviado: 21/Dez/2018, 16:55
por Marza
Boa tarde! Depois de uma semana "batendo cabeça", identifiquei o problema: o jumper (positivo e negativo) tinha 20cm de comprimento, cortei e fiz dois de 10cm. Funcionou!!

Re: GSM SIM 800l

Enviado: 23/Dez/2018, 03:08
por joao
Legal!!! Marca o tópico como resolvido!

8-)

Re: GSM SIM 800l

Enviado: 27/Dez/2018, 11:10
por GabrielMajaron
O que poderia ser também é a alimentação do módulo, que tem que ser de 3.6 a 4.2V
Caso ele seja alimentado com 5V ele pode desligar/reiniciar por segurança

GSM SIM 800l

Enviado: 10/Mar/2019, 20:30
por Geraldrob
Hi,

I am having PIN locked GSM Sim, So is there any way to unlock it programatically ?

Thanks In Advance...

Imagem

GSM SIM 800l

Enviado: 24/Abr/2019, 12:09
por bennieIncok
Zdravim.
Znamy koupil branu s otviranim pres GSM a resi nejakou sim kartu.
Jeden znamy mu pry tvrdil, ze u nekterych operatoru se da ziskat druha sim na jeden tarif.
Co je na tom pravda?

GSM SIM 800l

Enviado: 13/Jul/2019, 15:18
por Barrysazib
Hi I have tried to get my GSM SIM900 shield up and working but I have some problems.
I have followed the instructions and used the code to “Creating a test setup for the GPRS Shield” together with my Arduino Uno and the Arduino IDE.
The shield seems to work according to the leds, but the shield only displays the text “ÿÿÿÿÿÿÿÿ” when powering up the shield manually.
The communication seems to work because I have twice got the message “NORMAL POWER DOWN” when turning off the shield, but most of the time I only get a “ÿ” .

Do you have any idea of what’s wrong?